全球主机交流论坛

 找回密码
 注册

QQ登录

只需一步,快速开始

CeraNetworks网络延迟测速工具IP归属甄别会员请立即修改密码
查看: 658|回复: 3

$25鸡鸡下来了

[复制链接]
发表于 2019-12-1 18:14:12 | 显示全部楼层 |阅读模式
本帖最后由 Apian 于 2019-12-1 18:23 编辑
  1. [root[url=home.php?mod=space&uid=22998]@localhost[/url] ~]# fdisk -l

  2. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes, 5860533168 sectors
  3. Units = sectors of 1 * 512 = 512 bytes
  4. Sector size (logical/physical): 512 bytes / 512 bytes
  5. I/O size (minimum/optimal): 512 bytes / 512 bytes

  6. WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.

  7. Disk /dev/sda: 3000.6 GB, 3000592982016 bytes, 5860533168 sectors
  8. Units = sectors of 1 * 512 = 512 bytes
  9. Sector size (logical/physical): 512 bytes / 512 bytes
  10. I/O size (minimum/optimal): 512 bytes / 512 bytes
  11. Disk label type: gpt
  12. Disk identifier: 1A0FA40E-C405-4EC1-A5F3-319919166F5C


  13. #         Start          End    Size  Type            Name
  14. 1         2048         4095      1M  BIOS boot
  15. 2         4096      2101247      1G  Microsoft basic
  16. 3      2101248     18618367    7.9G  Linux swap
  17. 4     18618368   5860532223    2.7T  Microsoft basic
  18. [root@localhost ~]# smartctl -A /dev/sda
  19. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1062.el7.x86_64] (local build)
  20. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

  21. === START OF READ SMART DATA SECTION ===
  22. SMART Attributes Data Structure revision number: 16
  23. Vendor Specific SMART Attributes with Thresholds:
  24. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  25.   1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  26.   2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  27.   3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       11669
  28.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       14
  29.   5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  30.   7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  31.   8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  32.   9 Power_On_Hours          0x0032   003   003   000    Old_age   Always       -       39117
  33. 10 Spin_Retry_Count        0x0033   100   100   030    Pre-fail  Always       -       0
  34. 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       14
  35. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       6
  36. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       9
  37. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       24
  38. 194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       27 (Min/Max 19/46)
  39. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  40. 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
  41. 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
  42. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  43. 220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
  44. 222 Loaded_Hours            0x0032   002   002   000    Old_age   Always       -       39220
  45. 223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
  46. 224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
  47. 226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       196
  48. 240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

  49. [root@localhost ~]# smartctl -A /dev/sdb
  50. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1062.el7.x86_64] (local build)
  51. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

  52. === START OF READ SMART DATA SECTION ===
  53. SMART Attributes Data Structure revision number: 16
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  56.   1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  57.   2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  58.   3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       12257
  59.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       33
  60.   5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  61.   7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  62.   8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  63.   9 Power_On_Hours          0x0032   031   030   000    Old_age   Always       -       27822
  64. 10 Spin_Retry_Count        0x0033   100   100   030    Pre-fail  Always       -       0
  65. 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       33
  66. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       2
  67. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       29
  68. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       37
  69. 194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       27 (Min/Max 13/43)
  70. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  71. 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
  72. 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
  73. 199 UDMA_CRC_Error_Count    0x0032   200   253   000    Old_age   Always       -       0
  74. 220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
  75. 222 Loaded_Hours            0x0032   028   028   000    Old_age   Always       -       29004
  76. 223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
  77. 224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
  78. 226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       108
  79. 240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
复制代码


----------------------------------------------------------------------
CPU Model            : Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz
CPU Cores            : 4 Cores 1200.000 MHz x86_64
CPU Cache            : 4096 KB
OS                   : CentOS 7.7.1908 (64 Bit) Dedicated
Kernel               : 3.10.0-1062.el7.x86_64
Total Space          : 1.6 GB / 2765.8 GB
Total RAM            : 174 MB / 7812 MB (705 MB Buff)
Total SWAP           : 0 MB / 8064 MB
Uptime               : 0 days 8 hour 7 min
Load Average         : 0.00, 0.01, 0.05
TCP CC               : cubic
ASN & ISP            : AS46261, QuickPacket
Organization         : QuickPacket, LLC
Location             : Los Angeles, United States / US
Region               : California
----------------------------------------------------------------------
I/O Speed( 1.0GB )   : 137 MB/s
I/O Speed( 1.0GB )   : 148 MB/s
I/O Speed( 1.0GB )   : 151 MB/s
Average I/O Speed    : 145.3 MB/s
----------------------------------------------------------------------
Node Name        Upload Speed      Download Speed      Latency
Speedtest.net    927.86 Mbit/s     939.40 Mbit/s       1.364 ms
Fast.com         0.00 Mbit/s       169.0 Mbit/s        -
Beijing 5G   CT  21.12 Mbit/s      57.51 Mbit/s        -
Nanjing 5G   CT  2.93 Mbit/s       129.07 Mbit/s       -
Hefei 5G     CT  2.23 Mbit/s       48.20 Mbit/s        -
Guangzhou 5G CT  3.07 Mbit/s       1.61 Mbit/s         -
TianJin 5G   CU  65.00 Mbit/s      116.76 Mbit/s       -
Shanghai 5G  CU  23.05 Mbit/s      89.50 Mbit/s        -
Guangzhou 5G CU  16.28 Mbit/s      29.90 Mbit/s        -
Tianjin 5G   CM  2.41 Mbit/s       52.13 Mbit/s        -
Wuxi 5G      CM  1.53 Mbit/s       10.86 Mbit/s        -
Nanjing 5G   CM  1.67 Mbit/s       18.90 Mbit/s        -
Hefei 5G     CM  2.87 Mbit/s       29.15 Mbit/s        -
Changsha 5G  CM  1.41 Mbit/s       377.10 Mbit/s       -
----------------------------------------------------------------------

没地方装系统?只看到个IPMI。。。
发表于 2019-12-1 18:24:42 | 显示全部楼层
我也想知道。。。
因为我想做RAID
 楼主| 发表于 2019-12-1 18:38:39 | 显示全部楼层
skycity 发表于 2019-12-1 18:24
我也想知道。。。
因为我想做RAID

是的,我也打算做raid0
 楼主| 发表于 2019-12-2 15:09:01 | 显示全部楼层
这个机器没人玩。。。
昨天测试到今天,环境都没安装,感觉一般般。。。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|小黑屋|全球主机交流论坛

GMT+8, 2024-4-26 15:49 , Processed in 0.064085 second(s), 8 queries , Gzip On, MemCache On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表